When I was in middle school, I had a classmate who would look at trigonometric functions and yell, "I will never need these!" A lot of us had similar thoughts but wouldn't say them out loud. But there's a subreddit that proves otherwise.
'They Did the Math' is full of useless yet fascinating calculations for all of us normies who can't crunch the numbers ourselves. From how many flies it would take to lift an average person to how fast a Godzilla-sized snail would crawl, here are some of the most interesting questions—and answers—we found scrolling through its feed.
#41 How Accurate Is This?

RoadsterTracker:
That plot is somewhere around 15 meters of seawater rise. Sea level rise is ~7 meters if all of Greenland melts, and Antarctica is around 60 meters. It's pretty unlikely that in a mere 50 years it will be that flooded. Greenland melting will happen eventually given a 3-5 degree C rise in temperature, which seems increasingly likely, but it would take a while. The worst case models right now predict maybe a 4 degree rise in temperature by 2075, and it would still take the ice some time to melt after that.
That plot is somewhere around 15 meters of seawater rise. Sea level rise is ~7 meters if all of Greenland melts, and Antarctica is around 60 meters. It's pretty unlikely that in a mere 50 years it will be that flooded. Greenland melting will happen eventually given a 3-5 degree C rise in temperature, which seems increasingly likely, but it would take a while. The worst case models right now predict maybe a 4 degree rise in temperature by 2075, and it would still take the ice some time to melt after that.
Report
9points
#42 4.7% For All Of Us Public College?

ElevationAV: Assuming we're doing a 1 time tax on Bezos' net worth of ~250 Billion, that gives us 11.75 Billion once. Free college in the US is estimated to cost between $28B and $75B per year; Sanders plan estimates at least $48B per year; so no, a 4.7% tax on just Bezos wouldn't even provide half the funding for a single year.
Report
8points
#43 How Much Money Could You Make Doing This?

u/dr_pickles69: According to some sources, the average cost of a kidney transplant in the United States was around $442,500 in 2020. However, this does not reflect the actual price that a donor would receive, as most of the cost goes to the hospital, the surgeon, the recipient, and other expenses. On the black market, a kidney donor might get anywhere from $1,000 to $200,000, depending on the country and the demand. If we take the average of these figures, we can estimate that a kidney donor on the black market would make about $50,000 per kidney. Therefore, if Deadpool sold 500 of his kidneys, he would make about $25 million.
Report
8points
#44 What Would Happen? Could We Survive This?

John12345678991: Well that’s over 10x increase so everything would immediately weigh like 12 times more. Every building would collapse cuz they use factor of safeties of like 2-4. Everyone standing would break most of their bones. If ur just laying on the ground outside u might be ok.
Report
8points
#45 Best Way To Do It ?

A: 24*365
B: 60*60*24
C: 365*10
D: 60*24*7
We see that A > C and B > D. Both A and B contain 24. Lets remove it.
A': 365 B': 60*60
B is bigger by one order of magnitude.
Report
8points
#46 What Would Be It's Price If It Had Been A Real Natural Diamond?

Rhuobhe26:
It would be priceless beyond belief a literal one of a kind in the world eclipsing all other stones. The original Cullinan stone, the largest and possibly most famous of all diamonds was an uncut stone 4 inches long and about 3,100 carats. It is beyond value and was cut into 9 large and 96 smaller stones the largest of which is 530 carats. If the diamond was actually the full 4 inches in size or 100mm, with a deep cut then it would be 4,800 carats. The most expensive diamond ever sold at Auction was the CTF Pink Star, it sold in 2017 by Sotheby's for $71.2 million and was 59.60 carats. Now you can't compare the two, but just using those numbers that's $1.19 million per carat. So between 2,624 to 4,800 carats at the same price...$3.13 billion to $5.73 billion.
It would be priceless beyond belief a literal one of a kind in the world eclipsing all other stones. The original Cullinan stone, the largest and possibly most famous of all diamonds was an uncut stone 4 inches long and about 3,100 carats. It is beyond value and was cut into 9 large and 96 smaller stones the largest of which is 530 carats. If the diamond was actually the full 4 inches in size or 100mm, with a deep cut then it would be 4,800 carats. The most expensive diamond ever sold at Auction was the CTF Pink Star, it sold in 2017 by Sotheby's for $71.2 million and was 59.60 carats. Now you can't compare the two, but just using those numbers that's $1.19 million per carat. So between 2,624 to 4,800 carats at the same price...$3.13 billion to $5.73 billion.
Report
8points
#47 Is This Accurate?

tutorcontrol: Approximately, yes. Average distance is 12.5 light minutes for a ping of 1.5 million ignoring the electronics. 182 light seconds is the closest recorded position for a ping of 364,000, also as a "mirror bounce". This is why the rover has some longer commands and autonomous capabilities to break the control loop latency problem. So far, nothing with a 100 ms control loop has tried to chase it, and rocks tend to have effective pings around 3 e 12, so 1e7 is pretty good.
Report
7points
#48 Aside The Absurdity Of Having 3 Millions Easily At Your Disposal, Is It Possible To Live Like This?

Deep-Thought4242: The structure is accurate, the details are wrong. Treasury bonds don't literally pay you monthly. I think those pay twice a year. And the current yields are 4-5% not 8%. But that means you can buy $3 M in T-Bonds and then twice a year, you'll get about 67,000 to spend. ETA: most people with $3M+ portfolios would consider this an unwise use of it, though it is very low risk.
Report
7points
#49 How Much More Would This Cost An Airline?

dwaynebathtub: "Normal (dumb) route": 5,650 miles "AI-powered route": 6,340 miles I used distancefromto.net and the Google Maps "Measure distance" tool. Normal route distance is 11% shorter.
SenorTron: This isn't a calculation, but for anyone wondering what's happening here the curved line is actually straight (following the curve of the Earth) and the straight line would actually be curved in reality.
SenorTron: This isn't a calculation, but for anyone wondering what's happening here the curved line is actually straight (following the curve of the Earth) and the straight line would actually be curved in reality.
Report
7points
#50 Given That Pi Is Infinitely Long And Doesn't Loop Anywhere, Is There Any Chance Of This Sequence Appearing Somewhere Down The Digits?

tdammers:
Yes - if Pi does indeed work the way we think it does, then literally every finite sequence of digits is going to be present in the decimal expansion of Pi somewhere. In fact, there will even be infinitely many occurrences of it. This hinges on Pi being a Normal Number; this has neither been proven nor disproven so far, but most people seem to expect Pi to be normal.
Yes - if Pi does indeed work the way we think it does, then literally every finite sequence of digits is going to be present in the decimal expansion of Pi somewhere. In fact, there will even be infinitely many occurrences of it. This hinges on Pi being a Normal Number; this has neither been proven nor disproven so far, but most people seem to expect Pi to be normal.
Report
7points
#51 Why Wouldn’t This Work?

nog642: It would work, it would just make the water come out of your faucet a bit slower and wouldn't generate much power. Typical flow rate for a kitchen faucet is 2.2 gallons per minute say. That's 139 grams of water per second. And let's overestimate the velocity and say it's 3 m/s (6.7 mph). Then the kinetic energy of 139 g of water at that speed is 0.63 J, so the max power generated would be 0.63 W (and it would be less because we're overestimating and a turbine can't capture all the energy). A 5 V USB charger drawing 1 A, which is what those really slow basic phone chargers with none of the faster charging capabilities draw, is already using 5 W. So you couldn't even charge a phone on this if you had the water running constantly. Maybe you could charge your phone while you run your bath. But what's the point of that?
Report
6points
#52 Is This True

FriendlySceptic: 9mm Bullet: Mass: ~8 grams (124 grains) Speed: ~350 m/s (varies by load) Kinetic energy: around 490–600 joules Sling projectile (lead or stone): Mass: ~50–100 grams Speed: ~30–60 m/s in skilled hands (some reconstructions reach ~70–100 m/s) Kinetic energy: around 200–500 joules, sometimes higher. Force of the hit is comparable but the damage caused isn’t the same. A bullet’s velocity is much higher, so it causes more penetration and shock trauma, while a slingstone delivers more blunt-force trauma and can still break bones. Sort of like getting poked with a spear vs hit with a mace. Same force in the strike but very different results even though both are potentially lethal.
Report
6points
#53 [request] Is That True?

PacNWDad: Assuming the diameter of the Dum-Dum is 2 cm, that is about 80 grams of U-235. 80g of uranium will release about 6 x 1012 joules of energy in a fission reaction. The average American uses about 3 x 1011 joules of energy per year for all use (not just home electricity, but transportation, workplace, share of industrial production, etc.). That would mean the uranium can provide about 20 years of an average American’s energy consumption. So, yeah this is in the ballpark, although about 1/4th what would actually be needed for a full 84 years. It would be more like 300g. Note that this is a little misleading, since U-235 is only about 0.7% of naturally occurring uranium. So actually, they would need to process about 42 kg of uranium to get the 300g of U-235.
Report
6points
#54 How Big Or Small Would The Room Need To Be For 1 Person To Suffocate Due To This Chain In 24 Hours?

CanoePickLocks: It’s been actually studied. For their simulation of a chain locker with roughly 21:1 air to chain ratio it was 24 hours for [fatal] levels at 23°C and 60 hours at 10°C. For exact information you would need a ton of measurements.
Report
6points
#55 How Accurate Is This?

Solondthewookiee: It would depend on the exact year and how they calculate purchasing power. Here's the method I used: Median home price 1970: $17,000 Median home price 2024: $420,000 Minimum wage 1970: $1.45/hr Min wage as a percentage of home price 1970 = 1.45/17000 = 8.53e-5 Multiplying that by 2024 home price: (8.53e-5)(420000) = 35.82. So not $66/hr, but several times the current minimum wage.
Report
6points
#56 Is There A Correct Answer?

andrew_calcs: No. It’s a paradox. B is not a fraction of 4 so can never be correct in a 4 element set with discrete correct answers. For C to be correct you would need 2 elements of the set to be 50%, so C cannot be correct. For either A or D to be correct you would need 1 element of the set to be 25%. Since there are two, neither can be correct.
Report
6points
#57 This Is A Wrong Problem, Right?

49 dogs total = number of big dogs + number of small dogs(number of big dogs plus 36) 49 = x + (x+36) which can be rewritten as 49 = 2x + 36 13 = 2x X = 6.5 Can't have half a dog so yeah I'd assume something's off here.
Report
6points
#58 [request] How Long Would It Take A Teeny Tiny Black Hole, Created On The Surface Of Our Planet, To Destroy Earth?

wayoverpaid:
Cake Sprinkle isn't an official measurement, but I'm gonna pick 1mm for the size since that's my eyeball size of the dot in the picture. That 1mm in this case actually the event horizon. Such a black hole won't decay quickly. The luminosity from it will be under one watt, and the lifetime is on the order of 1047 years. The mass of such a black hole would be roughly 10% the mass of the earth, or about 10x the mass of the moon. That much mass in such a small area would immediately fall towards the core of the earth. So you have to define "destroy the earth" because having the tidal forces of an object 10x the mass of the moon falling through the core would probably create massive damage well before the earth fell into it. As for how long it takes the earth to actually be absorbed, that depends on at what point the destroyed rubble of the earth orbiting the black hole no longer counts as the earth. A hypothetical tunnel through the earth would take under an hour to fall through and out the other side. So likely by the time an hour has passed the planet is no longer stable. How long it takes every last bit of earth matter to fall into the black hole is a physical simulation I lack the power to do, but by the time you're talking about accretion disks, the Earth is pretty destroyed.
Cake Sprinkle isn't an official measurement, but I'm gonna pick 1mm for the size since that's my eyeball size of the dot in the picture. That 1mm in this case actually the event horizon. Such a black hole won't decay quickly. The luminosity from it will be under one watt, and the lifetime is on the order of 1047 years. The mass of such a black hole would be roughly 10% the mass of the earth, or about 10x the mass of the moon. That much mass in such a small area would immediately fall towards the core of the earth. So you have to define "destroy the earth" because having the tidal forces of an object 10x the mass of the moon falling through the core would probably create massive damage well before the earth fell into it. As for how long it takes the earth to actually be absorbed, that depends on at what point the destroyed rubble of the earth orbiting the black hole no longer counts as the earth. A hypothetical tunnel through the earth would take under an hour to fall through and out the other side. So likely by the time an hour has passed the planet is no longer stable. How long it takes every last bit of earth matter to fall into the black hole is a physical simulation I lack the power to do, but by the time you're talking about accretion disks, the Earth is pretty destroyed.
Report
6points
#59 Approximately How Large Was The Font Size Before And After?

Gnochi:
With the same sequence of characters and font, you can assume that the number of pages scales with the inverse square of the font size, since characters per row and rows per page both scale inversely with font size, with a scaling factor K depending on frequency of character use and the font character lengths and kerning. Set F as the original font size, and F-2 as the new font size. K / F2 is the number of characters per page in the original, so with 30 pages we have 30 x K / F2 characters. By that same logic, 22 x K / (F-2)2 is the same number of characters. Thus: 30 x K / F2 = 22 x K / (F-2)2 22 x F2 = 30 x (F-2)2 22F2 = 30F2 - 120F + 120 8F2 - 120F +120 = 0 F2 - 15F + 15 = 0 F = (15 +/- sqrt(225 - 60))/2 F = ~1 or ~14, meaning F-2 = -1 or 12 The original document was font size 14, and it was shrunk to font size 12.
With the same sequence of characters and font, you can assume that the number of pages scales with the inverse square of the font size, since characters per row and rows per page both scale inversely with font size, with a scaling factor K depending on frequency of character use and the font character lengths and kerning. Set F as the original font size, and F-2 as the new font size. K / F2 is the number of characters per page in the original, so with 30 pages we have 30 x K / F2 characters. By that same logic, 22 x K / (F-2)2 is the same number of characters. Thus: 30 x K / F2 = 22 x K / (F-2)2 22 x F2 = 30 x (F-2)2 22F2 = 30F2 - 120F + 120 8F2 - 120F +120 = 0 F2 - 15F + 15 = 0 F = (15 +/- sqrt(225 - 60))/2 F = ~1 or ~14, meaning F-2 = -1 or 12 The original document was font size 14, and it was shrunk to font size 12.
Report
6points
#60 How Much Weight Would The Boat Need To Have To Make This Possible?

Pretentious-Polymath:
Exactly enough so that it would sink when trying to use it the regular boating way. The buoancy in that setup is mass of displaced water minus mass of the boat. Volumes for boats can differ, but this should be around 2500 litres, so 2.5 tons of weight to stay underwater like that.
Exactly enough so that it would sink when trying to use it the regular boating way. The buoancy in that setup is mass of displaced water minus mass of the boat. Volumes for boats can differ, but this should be around 2500 litres, so 2.5 tons of weight to stay underwater like that.
Report
6points

