The reasons of using quality wood carving cnc router:
1, As a mechanization equipment, it is has high efficiency and low poor rate than artificial product.
2, Most of the woodworking engraving machine is gantry-style structure, which can be adjust the maximum limit to meet the feed.
3, The steel structure of heavy-duty bed can ensure the overall stability and qualitative of the machine.
4, The support surface is stability with circular rails or square rails. Rack drive and smooth transmission ensure long high-speed operation without deformation, no jitter.
So that it can ensure the accuracy and beauty of sculpture when the fine wood doors is carving, which greatly improve the efficiency of wooden doors production.
ld-1325z-wood-engraving-machine
The volume value of the relief is negative, the reliefs below the zero plane and all the reliefs above the zero plane look exactly the same. In fact, it is completely different. If the relief is mostly below the zero plane, it will result in the engraving machine Z-axis trip is not enough after making the path. This is something you do not want to see, and you can use either of the two methods described below to work around this problem:
Workaround 1:
1, Connect all colors. So that the main color (probably white) fill the entire two-dimensional view.
2. Set the main color property to Flat Surface. Its height is the same as the relief height below the zero plane.
3. Apply this setting to the relief. So the relief will move above the zero plane.
Workaround 2:
1. Open the setup location table. Select the Set Location option from the Model menu option in the main menu.
2, Move the cursor in two-dimensional inspection. Look for the lowest Z-axis value (the Z-axis value appears in the XYZ status bar).
3. Select the lower left pixel in the lowest reference pixel.
4, set the Z value for the method to find a Z-axis value. For example, the actual location option. Assuming that the lowest value of the Z-axis is found in Method 1, enter a value of 10 here.
5, Application settings. Click to accept.
6, Check the Z value is the required Z value. Moving the cursor in 2D inspection.
