Advertising cnc router, in principle, is a combination of drilling and milling machining, and multiple data entry modes as required is easy to realize. CNC router engraving machine includes two categories: laser engraving and mechanical engraving , these two types have high power and low power. Since the application scope of advertising machine is widely used, it is necessary to understand the most suitable applied areas by different engraving machine. The low-power machine is only suitable for color plates, building models, small signs, three-dimensional crafts. Since the power is too small to significantly affect the scope of its application. High-power engraving machine can do carving by the low-power engraving machine, which is the most suitable for large-scale cutting, embossing and carving.
Longdiao advertising cnc router machine
Advertising engraving machine tool under prolonged use will have wear problem of insufficient precision, how to replace the tool? The following brief introduction of advertising engraving machine knife handling methods by Longdiao is for readers’ reference, as well as problems that need attention.
1. when load knife, use gasoline or WD40 cleaning agent to clean chucks and pressure cap.
2. To insert chuck into the pressure cap. Otherwise, the tool is not easy being installed, if not clamped in the chuck pressure cap, unloading tool chuck pinch in the motor shaft can not be unloaded.
3. To pay attention if the clamping chuck and the selected tool match, otherwise the tool can not be installed tight.
4. Clamp the tool, the tool chuck projecting portion should not be too long, otherwise the process is prone to vibration, affecting the quality of the workpiece surface.
5. The tool change must ensure that the spindle speed is zero, namely the spindle stop state allowed disassembly tool, or prone to serious personal injury.
6. If use pressure foot sculpture, a vacuum cleaner must be used to clean up the dust, and then clamp the tool.
7. The pressure cap is screwed up in the process, be sure to press the rotor screw cap on the positive, first hand, without laborious screwing in place.
8. Before unloading the knife, use an air gun to clean up the scraps in the pressure cap and rotor shaft.
Advertising cnc router carving products:
advertising machine manufacturer productsadvertising machine cnc router machine productsChina Longdiao Advertising carving machine productsChina cnc router supplier - advertising carving
More info: en.longdiaocnc.com
